If the surface must be known before Grindor?Crushers can be hazardous if used properly.
Read the instructions.
Precision Surface
We recommend working with mill speed.
Media or magnetic disk, a piece of fresh or fixed to a bicycle is not removed completely set.
Certain materials made Grindor grow.
Does not work without enough air grinding.
Wheel tread, which is the original Grindor activity.
Do not stand directly in front of the mill wheel.
Suddenly, Do yourself a coarse wheel or disk is cold press against the decision.
Do not make the drive to play the block. Can reach over or near a spinning wheel coolant before stopping wheel avoid creating a situation of inequality away. Taka, tools and equipment, to be open workspace.
Clean and free of oil and oil in the ground, keep grinding.
What you should do things to avoid as Grindor face? Surface Grinding - What you should know And properly trained to understand the instructions before starting work on the surface of Grindor purchase.
What are the basic safety rules for use of Grindor face?
Add to wear safety glasses. In addition,. If it is necessary to reduce paper, recycle
V / mill operator, make sure buttons are easily accessible off.
Check the wheel to work. Ensure that work and there is a ticket-you-well. Follow the instructions from the manufacturer arohisuvaga grinding wheels.
Hold the left face disc. Ensure that at least half of the cycle, which has a coat. Trim surface of the magnetic field set of disks.Magnetic disk clean cloth free from his hand. Place the paper plate, place the middle, a little more. Place slices on paper and magnetic disks have been added. Try adjusted to remove the magnetic disk production, on the check. Before you begin, ensure that no opportunity to touch the wheel. About a minute before the start of a new cycle decisions.
Add to wear safety glasses. In addition,. If it is necessary to reduce paper, recycle
V / mill operator, make sure buttons are easily accessible off.
Check the wheel to work. Ensure that work and there is a ticket-you-well. Follow the instructions from the manufacturer arohisuvaga grinding wheels.
Hold the left face disc. Ensure that at least half of the cycle, which has a coat. Trim surface of the magnetic field set of disks.Magnetic disk clean cloth free from his hand. Place the paper plate, place the middle, a little more. Place slices on paper and magnetic disks have been added. Try adjusted to remove the magnetic disk production, on the check. Before you begin, ensure that no opportunity to touch the wheel. About a minute before the start of a new cycle decisions.
D. Before the noble standing on one side of the wheel.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น